The Branch Book

One characteristic of the big old oaks in the Spinney are the long long twisting branches that seem to defy gravity. Last year in December I needed to make some quick prints to make a small book to bind as part of a great 2 day course with bookbinder Ina Baumeister. On the course we were making a simple book but more importantly making our own bookcloth which was a complete eye opener.

For the book I made a very quick set of 8 sequential collagraph plates based on a long branch, printed to make a ten page codex book. (Good practise to get pagination right).

This is the result.

 

Branch Book 200 x 130mm, approx 8 x 5 inches

I have returned to this to develop it more, to get more practise with both printing and binding. One of my aims this year is to get more books made and although it’s a slow process it is very satisfying… when it goes right.

Today I printed 3 more sets on different papers to compare how they print, some thin, some thick…and hope to bind them slightly differently

Yes, it’s very slow, it took me all day to print them but another good resolution this year is to try and do things properly, ie: take time to cut the paper correctly, make printing guides and TRY to keep my grubby fingers off the paper. This I managed, just, but only after quite a few reprints. Of course if I had made the plates all the same size exactly in the first place it would have helped!
It’s a learning thing…